Portable Audio Amplifier
Designed to boost motorcycle speakers, the EAR3 V2 music headset amplifier output increases without any distortion (up to 10dB boost in volume with no more than a 0.3% harmonic distortion). The EAR3 V2 stereo amplifier includes a volume control machined from aluminum providing precise control for volume settings even with motorcycles gloves on.
Compatibility
Compatible with any device with a 3.5mm audio output port. The small, simple, compact and portable design of the EAR3 Helmet Amp is both practical and powerful, suitable for all helmets to boost the volume of your helmet speakers. Securing and releasing the amp from your helmet with its quick release design allows you to move it between your helmets whenever you want.
Transparency Mode
Want to hear what’s happening around you? The IASUS EAR3 is a portable audio amplifier with a ‘smart’ mic transparency mode to seamlessly blend your music with the ambient environment around you the way you like it. No more close calls with traffic or interruption to your music. Create a fuller, more robust sound experience as the EAR3 amplifies your audio with the precise analog volume control.
Turn on the EAR3 smart mic transparency mode by pushing the slider to the on position and experience the blend of your music with the outside sound in.
Specifications
+ Output Power: 55mW per channel x 2
+ Output Load 16Ω
+ Maximum Noise Output: Less than 0.5mV
+ S/N Ratio: 100dB@32Ω, 20mW
+ Sensitivity Frequency Response: 10Hz to 100Khz +0/-0.1dB
+ Impedence: Input: 1k Ohm, Output: 16-32 Ohm
+ Weight: 1.37oz (39g) including battery
+ Battery: Built-in lithium-polymer (LiPo) battery can last up to 20 hours per charge.
+ Dimensions: 2.0″ x 1.5″ x 0.8″ (51mm x 37mm x 20mm)
What’s Included
+ EAR3 Helmet Amp
+ Helmet mount with 3m adhesive sticker
+ Built-in rechargeable lithium battery
+ Extension cable with right angled plug (long – 10 inches)
+ Extension cable (short – 5 inches)
+ 3.5mm pin to USB charging cable
Warning
Do not turn the volume up too high on the EAR3H. It have the potential to damage helmet speakers, earphones, headphones, etc., should they not be rated for a higher audio input. Use the volume amplification slowly and proceed with caution to avoid over boosting your helmet speakers, earphones, headphones, etc., but most importantly, to avoid permanently damaging your hearing.
High Definition Audio
The sleek, hyper lightweight CNC-machined aluminum body provides an extremely thin yet robust acoustically tuned housing for the IASUS dynamically tuned audio drivers to project the fullest and clearest sounds possible.
Precise and Slim Design
Solid clean bass and crisp highs mean the XSound 3 delivers audio as originally intended, rivaling the best full sized headphones on the market. And thanks to its low profile exterior, the XSound 3 easily fits inside almost any helmet. (0.39″ (9.9mm) thin and 1.77″ (45mm) diameter).
No Boundaries
The XSound 3 helmet speakers are compatible with the IASUS Rekon helmet comm system, Stealth throat mic or other comms when directly plugged in. The standard 3.5mm (1/8″) plug ensures connection with almost any mobile audio device.
Specifications
Max Power – 25 mW
Impedence – 60 Ohm
Frequency Range – 20Hz – 22kHz
Sensitivity – 125dB
Weight – 34g (1.2oz)
HD Audio – Full range hi-def sound
Compatibility – Angled 3.5mm pin
Connector – Gold plated connectors for increased audio performance
Wire Lengths – Kevlar reinforced wires for superior durability Left wire length: 40cm Right wire length: 20cm
What’s Included
+ Speakers – Left and right speakers with premium 3M Velcro Adhesives
+ Extension Cable – 3’4″ (1m) Kevlar reinforced 3.5mm extension cable for direct audio input.
+ Foam Covers
+ Foam Spacing Pads
Installation
For proper installation, the XSound 3 helmet speakers need to be touching your ears during use inside your helmet. You may use the included foam spacing pads to achieve this.
We also recommend that the helmet speakers are mounted in a more forward and lower position in the ear pockets to accommodate your ears more effectively.
Proper speaker placement is crucial. Please install the included foam pads to position the speakers to be right up to the ears. Any space left between the ear and speaker will result in a lower volume and usually leads to the volume being turned up to excessive levels. THIS MAY CAUSE PERMANENT DAMAGE TO THE SPEAKERS. IASUS does not recommend listening to music at excessive levels which may lead to hearing damage.
More information
Reviews
There are no reviews yet.